This hydraulic laying clamp is for the installation as well as the removal of block steps.
The special combination of exchangeable gripping jaws creates the necessary flexibility to grab stones either length- or crosswise.
Use exchangeable gripping jaws for further elements within landscaping or road construction.
- placing block steps
- pick up from pallet alone
- place precisely
- easy set up and operating
- exchangable gripping jaw
Hydraulic laying grab for block step stones in two variants.
The Block Step Laying Clamp is the combination of the Multi-Stone Grab S100 or S400 with a combination of two or four rubber jaws.
It works best attached on an excavator or loader. It is small and compact so you easyly take it along with your transporter. The hydraulic cylinders are protected within the frame. So no worries in case of longer working breaks. Overpressure & shut-off valves ensure the best work safety.
|Dead Weight:||57 kg|
|Load Capacity:||150 kg|
|Gripping Range:||4-120 cm|
|Carrier Machines:||Excavators above 800 kg, loaders, loading cranes, forklifts, paver laying machines|
|Gripping Jaws:||2 Rubber Jaws 6 cm|
2 Rubber Jaws 12 cm
|Dead Weight:||120 kg|
|Load Capacity:||400 kg|
|Gripping Range:||0-159 cm|
|Carrier Machines:||Excavators above 2,3 t, loaders, loading cranes, forklift, paver laying machines forklift|
|Gripping Jaws:||2 Rubber Jaws 7 cm|
2 Rubber Jaws 14 cm
- Hydraulic rotator 360° with freewheel feature
- Standard quick hitch adapter
- Hydraulic hoses and couplings to the carrier machine
- Swing brakes integrated in the suspension
The small S-100 works already with a micro excavator of 800 kg. Depending on the loads weight the bigger S-400 needs a mini excavator above 2.3 t.
Both grabs work with loaders, paving machines, truck loading cranes or even large excavators.
Call us – we are happy to assist you.