Light hand screeding tool with a working width of 70 / 100 / 120/ 150 cm.
The Light Screeder is a particular light tool for creating a sand or grit base for pavers.
It is the right screeder to create correct crossovers and level narrow or small area.
The small Light Screeder PZ-70 is 1,9 kg light and even works as a shovel.
- Working upright
- Feather light
- Free hand or with screeding rails
- Roller Unit optional
- Working widths 70 / 100 / 120 / 150 cm
Create a sand or grit base according to your site requisition with or without trench pipes.
Use the PZ-70 for minor corrections free hand and even as a shovel. The 2 m long pole helps for far-reaching areas.
The Light Screeders are ideal helpers to spread sand or grit before levelling the material with ½ ″ trench pipes. Adjustable roller units on the plank’s side transfer the relevant height from the paver surface or the curb to the planum.
The low weight produces only little pressure. Therefore, narrow pipe trenches are sufficient and will stay in place.
Use the optional Roller Unit on the plank’s side to transfer the relevant height from the paver surface or the kerb to the base. There is no need for the elaborate setting of screeding rails.
For easy transportation just take the Light-Screeder apart toolless.
|Working Widths:||70 / 100 / 120 / 150 cm|
|Dead Weight: PZ-70/100/120/150:||1,9 / 2,1 / 2,3 / 2,5 kg|
|Grit-/sand base with rails|
|Grit-/sand handhold screeding|
|Grit heaps spreading|
|Pebbles 4-8 mm installing|
|Pebbles 8-16 mm installing|
|Pebbles 16-32 mm installing|
|Crushed sand 0-8 mm|| || || |
|Grit 0-32 mm installing|
|Frost blanket gravel (gritty) levelling|
|Recycling-Concrete 0-32 mm levelling|
|Sand spreading on paver|
|Humus spacing out|
|Mounting Roller Unit|
excellent suited well suited limited suited